Application and Popularization of Laser Engraving Plate Making Technology (2)

"The machine as a whole feels good and can save some of the costs."

In an interview with the reporter, Dongguan Huiyuan Paper Products Manufacturing Co., Ltd. Zhong Lianghai mentioned that the company purchased the laser engraving machine of Yueming Lasers in May 2002, which was the second generation product of Yueming.

In actual use, the advantage of the laser engraving machine is very obvious: the laser machine can make a very small Yu, which saves much more than the computer version, because the computer version is more expensive. If it is a large version, the laser can be hooked, and then hand-carved, much better than a simple manual engraving. Compared with the resin plate, using a laser engraving machine can save 50% of the cost, because buying a rubber plate is much cheaper than a computer plate. Although the product is inferior to the resin plate, it is much better than the rubber plate. At present, Dongguan Huiyuan Paper Manufacture Co., Ltd. uses few manual rubber and resin plates, and general carton printing uses laser engraving machines.

There are still defects that the circuit board and the replacement laser tube are more expensive, and the circuit board needs to be changed about once a year, changing it to 1000~2000 yuan; the laser tube should be changed about once every six months or so. . However, it does not hide, generally speaking, the company feels good about the overall use of the machine, that the effect is very good, while saving some of the cost.

(to be continued)