The development of domestic die-cutting hot stamping equipment has gone through three stages.
The first stage was before the mid-1980s. At this stage, China mainly produces vertical flat-pressing and die-cutting paper stamping equipment. The vertical flat die cutting machine, commonly known as the tiger's mouth, is said to be similar to the mouth biting action when it is working, and it is named because it is unsafe to work and easily hurts people. In any case, the working characteristics of the vertical flat die cutting machine are vividly explained. Since the production quality and production efficiency are related to the proficiency of operators and are prone to safety accidents, developed countries such as the United States have explicitly banned the use of such equipment. Due to the limitation of national conditions, the use of this kind of equipment in China is relatively common, and there are many manufacturers. Due to the low price and large production and sales, the annual output of such equipment in China is more than 1,000 units. With the advancement of humanistic concepts in our country and the continuous improvement of labor regulations, this semi-automatic die-cutting opportunity gradually fades out of the application field.
The second stage is from the mid-1980s to the end of the 20th century. This stage is the stage of introducing foreign models and mapping imitation. The main products are horizontal automatic flat pressing hot stamping die cutting equipment. At that time, only Shanghai Yahua and Hebei Yuyin had the ability to produce such products. But the overall performance is not high, the maximum speed of the machine is about 5500 sheets / hour, the hot stamping is in the form of foil pulling, and the failure rate is relatively high.
The third stage is after entering the 21st century. This stage is to digest and absorb foreign advanced models and technologies and embark on the road of independent development. The enterprises that produce automatic die-cutting hot stamping equipment have also sprung up, with more than 20 companies. From the performance index, it has been greatly improved compared to the past. The maximum speed of the machine is generally 7500 sheets / hour, and the die cutting accuracy is about ± 0.075mm; hot stamping has been developed into a foil-based form, and the speed can also reach 6000 More than Zhang / hour, the accuracy is between ± 0.10- ± 0.30mm. From a functional point of view, the die-cutting machine has changed from single die-cutting to the standard configuration with the stripping function as the standard configuration. Shanghai Yahua also launched a full-waste automatic die-cutting machine with the function of cleaning finished products in 2006; bronzing The machine also has the function of vertical and horizontal bidirectional foil feeding, holographic positioning hot stamping, plain silver avoiding seam hot stamping for different users to buy.
Advantages and gaps
The world's manufacturers of automatic die-cutting hot stamping equipment are mainly concentrated in Europe, Japan and South Korea, China and Taiwan. From the point of view of the performance of the automatic die cutting machine, the Sprintera106-PER automatic die cutting machine of the Swiss BOBST company has a maximum paper format of 1060X740mm, with a waste removal and finished product unit, and the maximum speed can reach 12,000 sheets / hour, which is the highest in the world New concept model of the level. This machine brings together a number of novel designs from BOBST, such as: front-end and side-positioning devices that apply a brand-new concept, through the delivery of teeth and bite paper, and the printing and marking of the photoelectric positioning of the sleeve line, which ensures the accuracy of die cutting at high speed. And has good speed stability. In addition, BOBST's SP-104ER, SP-106LE and other models can reach a maximum speed of 9000 sheets / hour. Heidelberg's Dymatrix106CSD automatic die-cutting machine works differently from other brands of automatic die-cutting machines. Its movable platform is above the machine and it is die-cut from top to bottom. The machine has the functions of waste removal and finished product removal, and the maximum speed can reach 9000 sheets / hour. There is also the JRK105 automatic die-cutting machine produced by the Spanish company IBERICA (Iberica), which also has the functions of waste removal and finished product removal, and the maximum speed can also reach 9000 sheets / hour. The products of the above three companies represent the European level. In Asia, MJ1040 automatic die-cutting machine from Japan's IIJIMA company, TRP-106-SE automatic die-cutting machine from SANWA company, YT-1040NCS automatic die-cutting machine from Korea Yongxin K & C Company, applicable paper are all in 1050X750mm, the highest speed is 7500 About Zhang. Basically represents the Asian level. In China and Taiwan, there are many manufacturers of automatic die-cutting machines. Representatives include Shanghai Yahua, Hebei Yuyin, Tianjin Youheng, Taiwan Caishun, Taiwan Xuheng, etc.
From the point of view of the performance of the automatic hot stamping machine, BOBST's latest FOILMASTER104FR automatic hot stamping machine has a heating capacity increased by 50%, and has a Bernoulli paper stop system with a maximum speed of 8000 sheets / hour, which is the fastest " Flat pressing "hot stamping machine. According to reports, FOILMASTER104 has a very accurate foil-to-sheet registration device (FR configuration or aluminum foil registration), so the hot stamping accuracy is extremely high. In addition, BOBST's SP-102BMAFOILMASTER automatic hot stamping machine and the company's SPeriaFoilmaster102 automatic hot stamping machine exhibited at the IPEX06 'Birmingham show, the maximum speed can reach 7500 sheets / hour, holographic positioning hot stamping can also work stably at 6000 sheets / Hour represents the highest level in the world. Switzerland ’s GIETZ company also produces automatic hot stamping machines in Europe, but due to the company ’s low output and scale, it has fewer domestic sales. The domestic manufacturers of automatic hot stamping machines are representative of Shanghai Yahua, Tianjin Youheng, Hebei Yuyin, etc., and Taiwan's Caishun and Xuheng are stronger.
Domestic automatic horizontal flat die-cutting machine and bronzing die-cutting machine still have certain competitive advantages. On the one hand, compared with imported die-cut hot stamping equipment, domestic die-cut hot stamping equipment has obvious advantages in performance and price. The price of domestic machine is only equivalent to 1/5 to 1/4 of the imported machine of the same type. In addition, the after-sales service of domestic machines is also more timely than imported machines, and the work response time is faster. At present, many domestic die-cutting hot stamping equipment manufacturing enterprises have successively passed the ISO9000 quality system certification and European safety CE certification and the continuous development of high-end new products to gradually reduce the gap with international advanced models and achieve export export. For example, the products of Shanghai Yahua Company have been ranked first in the export of domestic packaging machinery industry for many consecutive years, and the price of exported products is higher than that of domestic products, which is "true export".
However, compared with the world's advanced models, domestic products still have a large gap, mainly in the following aspects:
First, the speed is not fast enough and the accuracy is not high enough. As a leader in this industry, Swiss BOBST exhibited an automatic full-clearing die cutting machine with a maximum speed of 12,000 sheets / hour as early as DRUPA04 '. The mainstream die cutting equipment in Europe and Japan has a speed of 9000 sheets / hour. Die cutting accuracy is usually ± 0.06mm; in hot stamping equipment products, the highest speed of BOBST company is 8000 sheets / hour, and the hot stamping accuracy is usually ± 0.05- ± 0.20mm. In comparison, the domestic automatic flat-bed die-cutting machine has a maximum speed of 7500 sheets / hour with an accuracy of ± 0.075mm, and the maximum speed of a bronzing machine is 6000 sheets / hour with an accuracy of ± 0.10- ± 0.30mm. Mid-range level.
Second, the stability is not high. Domestic die-cutting hot stamping equipment is restricted by the domestic machinery basic industry, such as materials, heat treatment process, machining, inspection methods and other conditions, so that the precision of parts is discretized, and even between the same order and the same order The quality varies from product to product, resulting in poor product stability. On the other hand, the durability of the product is not that small compared to the imported high-end die-cutting and hot stamping equipment, which is mainly manifested in that the registration accuracy will change after a period of use.
Third, the versatility of accessories is not high. The domestic die-cutting hot stamping equipment has a big gap with the developed countries in terms of parts processing and complete machine assembly. Therefore, the versatility of accessories such as honeycomb panels, plate frames, bottom templates, etc. cannot completely reassure users.
In addition, although the number of emerging die-cutting hot stamping equipment manufacturers is large and the development speed is fast, the overall level of specialization is low, the overall technical level is low, and the proportion of powerful enterprises is small. Especially since the beginning of the 21st century, the number of domestic die-cutting and hot stamping equipment manufacturing enterprises has surged, and manufacturers in Taiwan and abroad continue to build factories in China, bringing fierce competition to the domestic die-cutting and hot stamping equipment market.
This professional realistic female Mannequin Head made of high quality polypropylene resin environmental protection material, it is sturdy and long time use, it will not break during falls.
Head of the mannequin comes with netted wig cap to hold any wigs in place. The manikin head with shoulders consists of the face line, shoulders and chest. you also can fasten it to the stand. This manikin Head have the hole in the ear, and you can wear all kinds of earrings.
The manikin head has a realistic beautiful look, with eyelashes, lipstick and make up.
We offer dark brown, light brown, beige 3 different kinds of color. This professional manikin wig head is designed for displaying wigs, jewellery, scarves, toupee,hats, headphone, sunglasses,etc.
If there are any problems with mannequin head, like error style, damaged, please advise us, we can help solve it at first time.
Wig Display Mannequin Head,Mannequin Head With Shoulders,Wig Bust Wig Head,Wig Mannequin Head With Shoulders
Xuchang Le Yi De Import And Export Trade Co., Ltd. , https://www.synthetichairs.com