Straw hand-woven shrimp

Straw hand-woven shrimp Manual material: straw, scissors

1. Take a curved pipette and cut it from the far end of the pipe and cut it into three equal widths.

2. Pass one of the following figures and tighten.

3. The other side also passes through the tension.

4. Fold one of the two passed vertically upwards.

5. Fold the upwardly folded one forward (about 45 degrees) and fold a corner.

6,



7. The other side is also the same. After wearing it, the second section of the shrimp is made.

8. Make the third section of the shrimp body as described above.

9. After the three sections are finished, leave three or four centimeters and cut off the excess straw.

10. The wide strip on each side is then cut into four narrow strips for use as shrimp legs.

11, cut off the extra length

12, the production of shrimp tail is much simpler, cut from the distance of 1CM from the bend.