Recently, some media reported that under the catalysis of the EU New Toy Safety Directive and other regulations, the EU has intensively recalled Chinese-made toy products. The reasons for the recall include, without exception, excessive SCCP substances, including coatings. In this form, toy manufacturers have also raised the threshold for the purchase of raw materials, and put forward higher requirements for coatings and other related chemical raw material manufacturers. Undoubtedly, coating companies will carry greater pressure. In fact, not only that.
Recently, various environmental protection policies and industry standards have been introduced frequently, and the environmental pressure caused by the coating industry is increasing. Zhang Shuihe, secretary-general of Shanghai Paint Dyestuff Industry Association, recently revealed that relevant departments are formulating industrial environmental protection policies for the coatings and dyes industry; the Ministry of Environmental Protection is also formulating pollutant prevention and control policies for titanium dioxide industry, and the National Development and Reform Commission is formulating energy consumption standards for titanium dioxide industry; The ministry recently revealed that the preparation of the "Air Pollution Prevention Action Plan", which has received much attention, has been completed and will be officially issued in the near future by the State Council document... but there is no doubt that the policies and standards directly or indirectly related to coatings will definitely be Will be introduced.
The industry believes that with the tightening of environmental protection policies and the tightening of industry standards, the environmental protection costs of coatings companies will increase significantly. In fact, the construction of "beautiful China" has become the national will, paying more attention to environmental pollution from top to bottom, and the environmental verification of the coating industry is gradually becoming more stringent. The purpose of the formulation of policies and standards is to develop advanced productive forces, rely on policies and standards to guide and technological development to promote deep adjustment of industrial structure. It can be said that strict environmental protection policies and industry standards are forcing the upgrading and adjustment of the coatings industry.
The new standards and new directives introduced by the EU to improve the entry barrier of the toy market are opportunities and challenges for every coatings company. If China's coatings companies want to get rid of the current predicament, they need to work hard on science and technology and green health. The pace of product upgrade adjustment and technological innovation, through the adoption of international standards and foreign advanced standards, to eliminate foreign technical barriers to trade, to shorten the gap with developed countries; in addition, the current low labor costs, low value-added low-cost competition The advantage is transformed into a high-quality competitive advantage with high technical content and strong risk resistance.
Investment points
In September 2013, the light industry sector outperformed the market: in September 2013, the light industry sector rose 6.44%, outperforming the market by 3.28 percentage points. The sub-sections were more average, with the best performance of Chinese entertainment products, up 15.88%, and packaging, printing, furniture, and other household light workers rose 6.9%, 7.49% and 4.89% respectively. The light industry sector has risen 25.27% since the beginning of 2013, leading the market by 30.47 percentage points.
The performance of paper packaging was bright, and the plastic packaging was slightly weak: 1) The downstream IT consumer goods in paper packaging continued to recover, and the upstream paper price remained stable: paper packaging enterprises benefited from the strong downstream demand and the utilization rate of enterprise capacity, the average profit growth rate in the first half of the year Up to 85%. Downstream IT equipment, home appliances and other IT consumer demand for strong recovery momentum continued; upstream white cardboard, white paper prices are low, and low-cost advantages remain. 2) The downstream food and beverage of plastic packaging is relatively flat in the daily chemical industry: the downstream products of plastic packaging are regaining warmer in August, while the dairy products have not improved significantly. Overall, the growth of food and beverage is slightly flatter than that of daily chemical products; In terms of year-to-date plastic pellets and film prices rose by about 5% year-on-year. Oil prices continued to rise in July-August, and there was a slight correction in September, but it is expected that there will be no cost advantage in the whole year.
Cigarette production and lottery sales continued to return to temperature: the traditional printing economy is still relatively sluggish; cigarette cigarette printing downstream cigarette production has continued to recover slightly since the beginning of the year, accumulating 0.8% year-on-year growth in August, and tobacco label printing companies have also expanded through mergers and acquisitions. The strategy achieved super-industry growth in performance; commercial printing continued to recover, with downstream lottery sales continuing to grow substantially, with a year-on-year growth of 25% in August, and a year-on-year growth rate since the beginning of the year. The upstream price of printing paper was basically stable, and the chain fell slightly.
Risk warning: 1. The macroeconomic recovery is lower than expected; 2. The export continues to be sluggish.
The huge wooden door consumer group and the wooden door industry in speeding up have caused many flooring, cabinets and furniture enterprises to touch the wooden door field. The annual output value of wooden doors is increasing at an annual growth rate of 24%. However, what everyone sees is the surface of the prosperity of the wooden door industry, and the low level of repetition and disorderly competition in the inner wooden door market makes the wooden door industry, the sunrise industry, appear to be fatigued too early after experiencing a brief acceleration in the starting stage. At present, the problems in the wooden door market can be summarized as the following aspects.
Follow the trend of imitation
Since most manufacturers do not have their own R&D department and core technology, they only rely on follow-up and imitation. Therefore, as soon as there is a new product on the market, there will be a large number of followers. It can be said that the wooden doors currently sold on the market are almost the same regardless of the variety, style and performance. Due to the general lack of personality, the wooden door brand gives the impression of “thousands of one sideâ€, which inevitably exacerbates the confusion of the market and increases the difficulty of consumers' choice and purchase.
Low market concentration
At present, hundreds of wooden door brands have emerged in the building materials market in various regions. The influx of so many product brands in two or three years has caused the current situation of the wooden door market to be overcrowded and mixed. This will inevitably lead to increased competition from manufacturers and premature reliance on price instruments. In order to survive, most companies have to sacrifice the interests of consumers to find ways to reduce costs in production and sales, resulting in product quality and after-sales service are not guaranteed, the result is increased consumer complaints and damage to the industry image.
Many manufacturers have not stepped out of the traditional sales model of the agent era, basically staying in the product function orientation, providing only the cold products, the market operation is extensive, the products are sold as soon as possible, and there is a lack of in-depth communication with consumers.
Short-term operation
Most companies are selling long-term development for immediate benefit. This narrow business view makes the interior door market lack continuous internal motivation from the beginning. Many manufacturers are short-term operation and good ideas, and do not spend on product development, quality control, economies of scale and sales services. The result is that the industry is at a low level of repeated construction, and the products, technologies, and markets are faltering, and the industry is showing signs of premature aging.
Lack of marketing concept
Many wooden door manufacturers have the background of agents who operate wooden doors or masters of production plants. Compared with other industries, these two industries are undoubtedly less market-oriented. Although the wooden door is not the same as the agent store in the development concept and function design, the backwardness of the marketing concept and technique makes it not out of the traditional sales model of the agent era, basically staying in the product function orientation, providing It's just an icy product, the market is extensive, the products are sold out, and there is a lack of deep communication with consumers. In fact, what consumers expect is not just a simple way for manufacturers to provide a security.
A room divider is a screen or piece of furniture placed in a way that divides a room into separate areas.
Room dividers are used by interior designers and architects as means to divide space into separate distinct areas.
A room divider for a conference hall.
There are a number of different types of room dividers such as cubicle partitions, pipe and drape screens, shoji screens, and walls. Room dividers can be made from many materials, including wood, fabric, plexiglass, framed cotton canvas, pleated fabric or mirrors. Plants, shelves or railings might also be used as dividers. Portable room dividers have folded wall panels supported on wheels.
Types
In general, room dividers are used in one of these ways:
To divide rooms, creating a more efficient use of the space within the room.
As decorators and/or accent pieces to add character to room space.
To hide areas of different usage or privacy protection
To decorate rooms for better home design effect
Room dividers differ in nature being either:
Permanent as in using wine shelves in restaurants
Built in as in sliding partitions in offices
Portable or temporary as for example in convention centers
Fixed room dividers and hanging room dividers
They may completely obscure as in floor to ceiling dividers, or may allow sight through as for example when plant pots are used to divide areas.
Room Divider Screen,Room Screen,Room Divider Panel,Floding Room Divider,Movable Room Divider,Wooden Room Divider
Jinan Tri-Tiger Technology Development Co., Ltd , https://www.tri-tigerfurniture.com