[ Chinese wardrobe net ] Faced with a large number of cloth wardrobes on the market, how do we go to buy a cost-effective cloth wardrobe? Today, let Xiaobian introduce you to the installation of the cloth wardrobe and the assembly of the cloth wardrobe.
1. Cloth Wardrobe Selection Guide
1. Look at the design of the wardrobe is reasonable: Although the cloth wardrobe is relatively simple in design, the wardrobe should have at least two-layer or three-layer design, generally designed as left and right structure and upper and lower structure.
One of the design spaces is small, mainly for folding clothes or folding quilts, while the other layer is generally larger, with steel poles, which can be used to hang jackets, shirts, etc. This design is conducive to the reasonable placement of various clothes.
2. Look at the degree of sealing of the wardrobe: the sealing of the simple cloth wardrobe is also an important factor to measure the quality of the wardrobe. If the sealing of the wardrobe is not good, it is very easy to enter the dust.
Even in the spring, it is easy to appear wet, and it loses the protective effect of the wardrobe. At present, the quality cloth wardrobe on the market generally uses a sealed zipper design, and there is a spacer cloth underneath to prevent dust from entering and ensure the clothes are clean and hygienic;
3. See if the wardrobe is easy to assemble: The most obvious feature of the cloth wardrobe is that it is easy to disassemble and install. Therefore, we should first understand the installation method and illustrations when selecting the simple cloth wardrobe.
In general, a well-designed simple cloth wardrobe can be completed by hand without any complicated tools, and the installation process generally takes no more than half an hour;
4. See if the wardrobe is stable: the stability of the wardrobe structure is very important, after all, the main use of the wardrobe is to hang clothes and put clothes.
The stability of the wardrobe depends mainly on the thickness and weight of the steel pipe. The heavier the steel pipe, the higher the weight and durability.
Also pay attention to the material of the steel pipe interface. At present, the better steel pipe interface is made of high quality ABS material. Compared with the inferior ordinary plastic interface, the force is better and the durability is stronger.
2. Cloth wardrobe assembly
1. Find the bottom frame: Find the parts of the cloth bottom frame and put them together. Note that it is only the bottom part of the cloth closet. Some have a shoe rack, you have to install the shoe rack first.
2. First cloth: Note that the second step is not to put the rest of the cloth wardrobe on the shelf, but on the cloth first.
Open the zipper of the cloth, and the place where the middle sticks is also pulled open, bottom down. There are some small holes dug in the bottom of the cloth. Pull the cloth from top to bottom according to the holes in the cloth closet and pull down the vertical pipes. You can not pull to the bottom first.
3. Overall look: Put the rest of the cloth wardrobe on the inside of the cloth, then pull the cloth up, cover the top of the tube, and adjust it until the cloth looks flat without wrinkles. (The installation method of some cloth wardrobes, the specific style also depends on the specific instructions)
Waterproof Diapers,Newborn Baby Diapers,Biodegradable Diapers,Best Disposable Diapers
Shandong Tianzige International Trade Co., Ltd , https://www.sdbabydiapers.com