In the process of working on a laptop, there will always be problems of one kind or another, and the laptop hard disk is one of the main hardwares with long problems, so what should the laptop hard drive be broken ? How to change the hard disk of the laptop? The following decoration home decoration network Xiaobian will answer for you one by one, hoping to help everyone.
What should I do if my laptop hard drive is broken?
1 , the general problem repair method:
(1) The bad phenomenon of the notebook hard disk is that it is easy to blue screen when booting or running, but it can still enter the system. This problem is generally easier to fix, mainly due to system partition problems. We open the DOS command prompt window and enter the command " chkdsk c: /f /r /x " to force the repair .
(2) Because it is to repair the system partition, you need to restart the computer to fix it.
(3) Individual small problems can also be repaired successfully with some repair software. It is recommended that you try DiskGenius first . To avoid false positives, it is recommended to first execute "Check partition table error" in the "Tools" menu.
(4) If there is no repair, execute the "bad track detection and repair" function in the "hard disk" menu.
(5) If there is a problem with the hard disk during the boot process, there is no need for all detection and repair here, or it will take a long time. Once set, you can "start detection" and "try to fix".
(6) The problem of seriousness can be detected by using more specialized tools. If it can be repaired best.
2 , serious problem low-grid repair method:
(1) The more common notebook hard disk may be damaged when it is not turned off, resulting in damage to the disk header information. If the 0 message is corrupted, then the low cell can be used. For example, we use DM software for low grid.
(2) After the DM is started , the default situation cannot be low. You need to open the advanced menu to execute the low grid. That is , press “ ALT+M †in the main interface of the DM to switch to the advanced menu, and select the “ (M)aintenance Options †command in the menu to enter the advanced menu .
(3) Then select the “ (U)tilities †item to enter the low-level formatting interface .
(4) Then DM will display a list of found hard drives, select the hard drive you want to operate, and press Enter. This step is extremely important and you must not choose the wrong one. If you only have one hard drive, just press Enter .
(5) After selecting the hard disk, then select “ Low Level Format †for low-level formatting . A warning window will pop up, press “ ALT+C †to confirm and continue .
(6) After confirmation, a window will pop up for you to confirm again, select “ YES †.
(7) After confirming, the low-level formatting operation of the hard disk is started, and a detailed percentage progress display is performed.
(8) Low-level operation takes a long time. It is recommended to do it before going to bed. Let it execute automatically when you sleep.
(9) In addition, many notebook hard drives are broken, can not be used to install the system, do not be discouraged, because the notebook hard drive is very small, so you can buy a mobile hard disk box, used to move the hard disk with a certain.
How to change the hard disk of the laptop?
Get a new notebook hard drive: The notebook uses a 2.5 -inch hard drive that is the same size as a solid-state drive and smaller than a desktop hard drive. If you encounter a laptop hard drive, you can buy a new 2.5 -inch notebook hard drive online or in Computer City . In addition, if your notebook supports SATA3.0 interface, we can also replace it with a solid state drive.
Remove the bottom cover of the notebook: the notebook replaces the hard disk, the biggest difficulty is to disassemble the rear cover, but most of the top cover of the notebook is better to disassemble, basically use a Phillips screwdriver, remove the bottom fixing screw, then open the bottom cover to see Go to the internal hard drive. In addition, some notebooks are more troublesome to remove the back cover. For example, the Lenovo Z400 and Z500 notebooks need to be disassembled after removing the back cover. The difficulty is relatively large.
Steps for replacing the hard disk: After unpacking the back cover of the bottom of the notebook, we can easily find the internal hard disk of the notebook. It is fixed on the motherboard. We first remove the fixing screws and then pull them out from the hard disk interface in parallel. After removing the notebook hard drive, we can see that the hard drive is also fixed by a frame. We then remove the fixing screws on the shelf, and then the hard drive can be removed. Next we will install the new hard drive into this holder and install the fixing screws. Then re-insert the hard disk into the hard disk interface, and then install the fixing screws to complete the hard disk replacement. Finally, reinstall the notebook back cover.
The above is what Xiaobian brought to you. What should I do if the laptop hard drive is broken? How to change? I believe that everyone has a basic understanding of how to change the hard disk after reading this article. If you want to know more about decoration, please click to enter the decoration knowledge channel .
More related wonderful reading:
Which is better for laptop hard drives? What is the use?
Is the laptop drive useful? What if I can't read the CD?
What are the laptop accessories? Laptop accessories
Which is better for a laptop keyboard? Notebook keyboard instructions
What is the laptop battery? Laptop battery type
G5 Slimming Machine,G5 Beauty Machine,G5 Vibrating Body Massager,G5 Vibration Slimming Machine
Guangzhou Lesen Xinpin Electronics Co.,Ltd , https://www.lesenxinpin.com