[ Chinese wardrobe net ] People who have been installed in the home know that the wardrobe door hinges in the bedroom are not well installed, or that after long-term use, the wardrobe door will not close, or when it is closed, there will be sound or shaking. In this issue, the overall wardrobe door hinge installation technique of Zhonghua Wardrobe.com provides detailed analysis of how to install the whole wardrobe door hinge.
[Closet door hinge introduction]
The hinge door hinge is also called the door hinge. It is a hardware accessory commonly used in the whole wardrobe. It is the carrier between the door and the cabinet.
[Overall wardrobe door hinge installation skills]
The first is the installation method. The installation method of the overall wardrobe door hinge is mainly selected according to the cover of the wardrobe door hinge.
Full cover: If it is necessary to cover the side panel of the cabinet, it is necessary to reserve a certain gap between the two to facilitate the safe opening of the door. You can choose a wardrobe door hinge with a straight arm of 0mm.
Half cover: Sometimes a large wardrobe is customized, and two doors are required to share a side panel of the cabinet. Therefore, a minimum gap is required between the two doors to ensure the bearing capacity of the two doors, and the coverage distance of each door. To reduce it, it is necessary to install a hinged door hinge hinged with a hinged arm, and a door hinge of about 9.5 mm in the middle can be selected.
Inside: The wardrobe door is located in the cabinet. Beside the side panel of the cabinet, a gap is needed to facilitate the safe opening of the door. Then you need to install a hinge with a very flexible hinge arm. You can choose a 16mm door hinge.
After the whole wardrobe door hinge is installed, it needs constant adjustment to allow the door to be installed in the best position.
1. The adjustment of the overall wardrobe door coverage distance: use a screwdriver to turn the screw to the right, the door needs to cover a small distance (-), and the wardrobe door coverage distance becomes larger (+). 2. Depth adjustment: It can be adjusted directly and continuously by eccentric screw.
3, height adjustment: through the height of the hinge base, you can accurately adjust the height.
4, spring force adjustment: some of the larger hinges in addition to the common å dimension adjustment, can also adjust the door's closing force, the most common force required in the tall and heavy wardrobe door is the base point, if it is applied to the narrower door and glass When the door is on, it is necessary to adjust the spring force. The spring force can be reduced to 50% by rotating the hinge adjustment screw. When there is noise in our closet door, it can be adjusted by turning the adjustment screw to the left and weakening the spring force. When our closet door does not close well, you can turn the right turn by adjusting the screw to increase the spring force and make the door close better.
Desk Chair,Ergonomic Chair,Computer Chair,Ergonomic Office Chair
Anji TianWei Steel and Plastic Products Co.,Ltd , https://www.twchair.com