[ Zhonghua Wardrobe ] The variety of plates for wardrobe louver sliding doors is rich. In summary, there are four types of commonly used plates. In view of the good choice of the selected wardrobe plates, it is necessary to look at the advantages and disadvantages of these plates.
1, fir integrated board
The fir board is also called the finger joint board. It is a small piece and a small piece of splicing. All the joints are glued. Secondly, the board has soft wood, insufficient strength and easy deformation and cracking. Thirdly, Its surface is not flat, it is easy to draw clothes, and the solution to the tick is to polish the paint, which will cause a high cost, two smells, no environmental protection, three paints are easy to change color, crack, fall off. Fourth, it is easy to be worms and difficult to care for.
Advantages: affordable, environmentally friendly, without the scent of the fir itself.
Disadvantages: the surface is rough and easy to hook clothes; because it is easy to deform and crack, it can only be fixed with the wall during processing, and can't move; the pile surface has many piles and small holes, which is not beautiful; it must be processed through multiple holes (fill holes, It can be put into use after grinding, waxing or painting) and after odor.
2, pure solid wood, imitation wood, solid wood veneer
The base material used for solid wood furniture is natural wood, and the real pattern of wood can be seen on the surface. Pure solid wood furniture has high requirements on craftsmanship and materials. Solid wood selection, drying, finger jointing, seaming and other requirements are very strict. If any process is not tight, small cracking and loose joints will occur. The entire set of furniture was so deformed that it could not be used.
Imitation wood furniture, from the appearance of solid wood furniture, the natural texture, feel and color of wood are exactly the same as solid wood furniture, but in fact, the furniture mixed with solid wood and wood-based panels, that is, the side panels, bottom, shelf and other components Thin wood veneered particleboard or MDF fiberboard, doors and drawers are made of solid wood. This process saves wood and reduces costs. So it is more acceptable in terms of price. Furniture manufacturers sometimes paint varnish or matt lacquer for solid wood furniture to express the natural color of wood.
Solid wood veneer generally refers to the veneer of solid wood, the surface of the solid wood, inside is the MDF. The performance is stable compared with pure solid wood, not easy to crack, but not as good as pure solid wood.
Advantages: style, noble, original temperament to cater to people's return to nature.
Disadvantages: the price is high, and it is difficult to take care of; because of the painting process, it is easy to change color, which is why the color of solid wood furniture will be used more and more. The fatal flaw of solid wood furniture, the most important is the change of water content makes it easy to deform, especially need to be careful, such as not allowing sunlight, not too cold or hot, too dry and humid environment is not suitable for solid wood furniture of. If you do not pay attention to the use, frequent switching of the air conditioner causes excessive changes in temperature and humidity, even if the qualified solid wood furniture products sometimes deform and crack.
3, wood board
The wood board is the blockboard on the market. It is a board made of natural rotary-cut veneer and solid wood board. The inner core is also made of poplar, birch, pine, or paulownia. The face material may be one or two layers of veneers respectively on both sides of the core, and may be classified into three layers of blockboard and five layers of blockboard. In the production process of blockboard, there will be problems such as excessive formaldehyde emission, unacceptable transverse static bending strength, unqualified product moisture content, and low bonding strength. The addition of a layer of three-ply board with wood grain to the blockboard and then painting is a common practice in woodworking furniture.
Advantages: affordable; easy to process, is a common board for woodworking hand-made furniture, more suitable for furniture interior panels.
Disadvantages: Many of the blockboard's release amount exceeds the standard; it is easy to deform; some plates have hollow phenomenon, which will affect the screw bite force, so the choice of blockboard, its quality is the key.
4, trimeric hydrogen ammonia plate
Melamine board, the full name is melamine impregnated film paper veneer wood-based panel. It is used to put paper with different colors or textures into the melamine resin adhesive to be soaked, then dried to a certain degree of curing, and laid on the surface of particleboard, medium density fiberboard or hardboard, which is hot pressed. Decorative plates. The melamine board has more design changes and more personality. It is the material of choice for European top furniture manufacturers, but the environmental requirements for the board are very strict and must meet the European E1 standard.
Advantages: affordable; no deformation, no cracking, no fading; rich colors; assembly and disassembly are very convenient, high-precision panel furniture can be disassembled and installed many times; environmentally friendly, fashionable.
Disadvantages: Furniture produced by wood-based panels with excessive formaldehyde will cause indoor environment pollution. Consumers should pay attention to the purchase, you can open the door or drawer to smell, if there is a strong irritating smell, it is mostly formaldehyde, it is not suitable for purchase.
The above is the introduction of the common plate of the wardrobe louver sliding door. After reading the advantages and disadvantages, you will have some understanding of the plate, so as to buy the most suitable wardrobe plate.
1.This category contains a variety of hot - selling dining chairs, style is also very good-looking, suitable for modern restaurants, are some of the best quality dining chairs.
2.Families and hotels are suitable for placing, it can make the overall style more perfect, and these dining chairs not only have high quality,but also have favorable price,they are more popular at the moment
3.The back and seat of this chair are comfortable that their foam have been thicken and the resilience is better.
Use the iron leg with gold plated,that make it is strong and beautiful.
And the leg is with 4 adjustable foot nails,that can be skid resistance and be wear-proof.
Dining Chair,Dining Room Table And Chairs,Dining Room Chairs,Dining Table And Chairs
ANJI ZHILI FURNITURE CO.,LTD. , https://www.zhili-furniture.com