The laying of ceramic tiles is a delicate task. The tiles of different rules are used for decoration, and their laying methods are also different, and the effect of tiles laid out in different ways is not the same. So there are several ways to lay the floor tiles , what should you pay attention to when laying tiles ? If you want to know, just take a look!
There are several ways to lay floor tiles
1. Dry Paving
One of the most commonly used floor tiles is the dry paving method. The specific method is to clean the floating sand and debris on the ground after watering and wetting the base, and use one to three dry cement mortar. Then lay it flat according to the horizontal line, put the brick on the mortar and then use the rubber hammer to vibrate. This method of paving can effectively avoid the phenomenon of bubbles and hollowing of the ground tiles, but the price is relatively expensive and the technical requirements higher.
2. Wet spreading method
The wet spreading method is a method that many families will adopt. The difference between it and the dry spreading method is that one to three dry cement mortar is replaced with ordinary water and cement mortar, so this method is easy to produce during the paving process. Air bubbles affect the service life of floor tiles.
3. Wave line laying method
Wave line is also called waveguide line, also known as lace or edge line, etc. It is mainly used in the area around the ground or in the aisle. Generally, it is a decorative line made by the block (ground) surface around the edge of the wall. In the floor ground practice, lines with different colors from the overall ground are added to increase the design effect.
4. Traditional paving method
The traditional method of laying ceramic tiles is to lay along a straight line. This is the most traditional method. When laying, the wall should be parallel to the wall. The brick joints must be aligned without leaving seams. The color jointing agent similar to the ceramic tile is jointed and treated, which looks refreshing and neat.
What to pay attention to when tiling
1. Check the arrival of ceramic tiles when purchasing materials
Regardless of whether you choose full-pack repair or half-pack repair, you need to check the quality of the tiles, because the tiles are prone to cracking during transportation, so the tiles must be checked for damage as soon as they arrive.
2. Make the bottoming level before the decoration
Before the tiles are laid, the flatness of the ground and the base of the wall must also be ensured. The head of the household can check with a horizontal ruler to prevent the problem of hollowing and falling off of the tiles in the future.
3. Accurate pay-off during decoration
When laying tiles, laying off the wire is a critical step. The head of the household needs to supervise the work on site. It is necessary to see whether the decoration master pays off the wire accurately and whether there is any obvious tilt. And the defense lines of the wall and the ground should be neat to avoid unevenness after the tiles are laid.
There are several kinds of floor tile laying methods , what should be paid attention to when laying tiles , I do n’t know if it will help you! There are many ways to lay tile , and now the laying technology is getting better and better, so the tiles are laid The effect is also very good.
What, the decoration still uses his own money? ! The Qi family is decorated in installments, with an ultra-low annual interest rate of 3.55% and a maximum loan of 1 million. Apply now to enjoy the discount
If you are interested in brand cooperation, content cooperation, and advertising of this website, please send an email to :.
A5 Golden Kraft Envelopes,A5 Golden Envelope,A5 Yellow Envelope,A5 Gold Pocket Envelope
Sun Kee Envelopes Limited , https://www.sunkeeenvelope.com