In computer typesetting, the output of film (including laser printer output sulfuric acid paper) is subject to dispensing operations. Because there are many types of graphic processing and typesetting software, distribution software, fonts, and so on, different types of publishing methods, use of fonts, etc. are different in their distribution. Although various graphic processing and typesetting software are better The compatibility is not completely without problems. Due to the influence of many factors, problems such as missing words, misplaced characters, garbled characters, and image distortions are sometimes encountered in the production and distribution. This requires that production and output operators should be familiar with common software and master the characteristics of each publication in production and Pay attention to the output.
1. At present, in addition to the common Founder system, Word, and other software, some graphic processing and layout software cannot process text boldly because it can cause ghosting at the edge of the Chinese text, which affects the clarity of the text output. Therefore, when using these software, it is best not to bold text, and when bold characters are needed, bolder fonts may be used instead. In addition, there are many types of fonts in the computer, such as the PS word TureType word Bitmap word, etc. In the graphic processing and layout software, there are also many kinds of font selection and use more convenient. The font is also very rich. However, when selecting fonts, you must pay attention to the fact that the fonts installed on the output device such as imagesetters have not been installed. You can download them from the network before installing them and then install them. For example, if you use the TrueType font that is not installed in the imagesetter, download this font from the network, but OS 8.5, OS 8.6 system has some problems in the download processing and sometimes you may lose the stroke problem. Therefore, you can output a large sample after downloading. And a small number of film trials, completely error-free and then mass-produced in order to avoid wasting material and time. In addition, due to differences in fonts between different fonts, and not fully compatible. To distinguish between different distribution features. Satisfy different output condition fonts. However, in a publishing system, you should choose a common font as the system default font, unless you need to open different fonts at the same time for different fonts, so as to avoid font errors when output. For the different types of font types can not be mixed to use the relevant fonts installed as much as possible to save output space. Be aware that server fonts cannot be installed but server fonts are available (slow) when necessary. When the font is replaced, it must be reselected directly if it has been confirmed. Otherwise, text and punctuation marks will cause a walk when the font is reset. It is best not to use text effects for very small texts, such as italic, hollow, and downline. Because different computer's font attributes and default options are different, such as when the files are converted to each other, the default kerning of the PC is converted to Mac normal kerning to avoid errors. Chinese version, Chinese version, English version and other versions have different support procedures for double-byte Chinese, so pay special attention when publishing. The same paragraph, the difference between different versions will result in different output and printing, such as Hanyi old and new punctuation marks are square. The old font cannot be one-to-one and it will cause garbled misplacement during download. In-line punctuation can cause problems in some systems and must be resolved by entering a special symbol using the area code. When Chinese and English are input or when Chinese and English are mixed, it is better to use the Chinese and English input methods and the Chinese and English fonts, otherwise it is easy to make Chinese characters press Chinese characters. In addition, for the use of today's more common PC platform publishing software to avoid the use of downloaded fonts when you want to output, because the software (especially pirated software) itself is not perfect enough it often appears garbled in the use of downloaded fonts, etc. malfunction. The same font can be installed on the PC platform and RIP at the same time. For the current use of Word typesetting software is very frequent. When outputting a page created using Word software on a PC platform, it is necessary to pay attention to turning the page into a monochrome page. Since the color pages created by Word software are all in RGB mode, the output is generally in the CMYK mode and therefore often appears when outputting. Some problems, even if separated in the RIP, often cause mistakes.
2. Due to the use of embossing features in graphic processing. Some software also has these features. Such as Pagemaker black version will automatically imprint. However, some color blocks and lines need to be done by themselves: Freehand, Illustrator and other software need to set black imprint. therefore. Check the imprinting function before dispensing. For other colors to be imprinted in the software, they need to be set during production.
However, it should be noted that the place where the gray check should be checked when setting the black plate imprint cannot be imprinted. For pages made with Illustrator software, because the direct publishing speed is slower, and sometimes the page size will change, you can save it as an EPS file and place it in Pagemaker. But pay attention to Pagemaker no impression effect, so. It is not possible to choose this method in a uniform manner, but rather to choose the method of posting according to the specific circumstances of the page.
3. Nowadays, some typesetting software has functions such as rotation, cropping, zooming, etc., but since the image is rotated in the typesetting software, not only the memory is occupied but also the amount of calculation at the time of the dispatch is increased, so that the time for issuing is increased. therefore. It is best not to rotate, crop, or zoom in the layout software. In addition, the image display in the typesetting software is rough cropping, reduced image inaccuracy, and such cropping and shrinking methods do not reduce the amount of information of the image, and cannot shorten the time of publication. In the typesetting software, enlarging the image affects the image quality. . Therefore, it is best to complete the rotation, cutting and scaling of the image in the scanning and image processing software. In addition, we must pay attention to the individual typesetting software typesetting process (especially Chinese and English mixing), you can not use the Qi line and the forced line, because the function of these typesetting software is not all forced to produce when the page is displayed on the screen has been in line, However, the actual output is another matter.
4. In the image storage. There are currently many formats with their own characteristics. According to the specific situation to choose the storage format to avoid errors. Such as the commonly used TIFF image storage format, due to the large amount of stored information. However, some RIPs will make mistakes when dealing with larger TIFF maps of the imposition software. Therefore, it is better to store the images with a large amount of information in the EPS format and then put them into the production queue. In addition. Some RIPs will have a noticeable jump when processing a 0-100% transition from the Pagemaker 6.5 software. This can be solved by adding noise to the gradient image in Photosho p. (Author: Lin water)
1. At present, in addition to the common Founder system, Word, and other software, some graphic processing and layout software cannot process text boldly because it can cause ghosting at the edge of the Chinese text, which affects the clarity of the text output. Therefore, when using these software, it is best not to bold text, and when bold characters are needed, bolder fonts may be used instead. In addition, there are many types of fonts in the computer, such as the PS word TureType word Bitmap word, etc. In the graphic processing and layout software, there are also many kinds of font selection and use more convenient. The font is also very rich. However, when selecting fonts, you must pay attention to the fact that the fonts installed on the output device such as imagesetters have not been installed. You can download them from the network before installing them and then install them. For example, if you use the TrueType font that is not installed in the imagesetter, download this font from the network, but OS 8.5, OS 8.6 system has some problems in the download processing and sometimes you may lose the stroke problem. Therefore, you can output a large sample after downloading. And a small number of film trials, completely error-free and then mass-produced in order to avoid wasting material and time. In addition, due to differences in fonts between different fonts, and not fully compatible. To distinguish between different distribution features. Satisfy different output condition fonts. However, in a publishing system, you should choose a common font as the system default font, unless you need to open different fonts at the same time for different fonts, so as to avoid font errors when output. For the different types of font types can not be mixed to use the relevant fonts installed as much as possible to save output space. Be aware that server fonts cannot be installed but server fonts are available (slow) when necessary. When the font is replaced, it must be reselected directly if it has been confirmed. Otherwise, text and punctuation marks will cause a walk when the font is reset. It is best not to use text effects for very small texts, such as italic, hollow, and downline. Because different computer's font attributes and default options are different, such as when the files are converted to each other, the default kerning of the PC is converted to Mac normal kerning to avoid errors. Chinese version, Chinese version, English version and other versions have different support procedures for double-byte Chinese, so pay special attention when publishing. The same paragraph, the difference between different versions will result in different output and printing, such as Hanyi old and new punctuation marks are square. The old font cannot be one-to-one and it will cause garbled misplacement during download. In-line punctuation can cause problems in some systems and must be resolved by entering a special symbol using the area code. When Chinese and English are input or when Chinese and English are mixed, it is better to use the Chinese and English input methods and the Chinese and English fonts, otherwise it is easy to make Chinese characters press Chinese characters. In addition, for the use of today's more common PC platform publishing software to avoid the use of downloaded fonts when you want to output, because the software (especially pirated software) itself is not perfect enough it often appears garbled in the use of downloaded fonts, etc. malfunction. The same font can be installed on the PC platform and RIP at the same time. For the current use of Word typesetting software is very frequent. When outputting a page created using Word software on a PC platform, it is necessary to pay attention to turning the page into a monochrome page. Since the color pages created by Word software are all in RGB mode, the output is generally in the CMYK mode and therefore often appears when outputting. Some problems, even if separated in the RIP, often cause mistakes.
2. Due to the use of embossing features in graphic processing. Some software also has these features. Such as Pagemaker black version will automatically imprint. However, some color blocks and lines need to be done by themselves: Freehand, Illustrator and other software need to set black imprint. therefore. Check the imprinting function before dispensing. For other colors to be imprinted in the software, they need to be set during production.
However, it should be noted that the place where the gray check should be checked when setting the black plate imprint cannot be imprinted. For pages made with Illustrator software, because the direct publishing speed is slower, and sometimes the page size will change, you can save it as an EPS file and place it in Pagemaker. But pay attention to Pagemaker no impression effect, so. It is not possible to choose this method in a uniform manner, but rather to choose the method of posting according to the specific circumstances of the page.
3. Nowadays, some typesetting software has functions such as rotation, cropping, zooming, etc., but since the image is rotated in the typesetting software, not only the memory is occupied but also the amount of calculation at the time of the dispatch is increased, so that the time for issuing is increased. therefore. It is best not to rotate, crop, or zoom in the layout software. In addition, the image display in the typesetting software is rough cropping, reduced image inaccuracy, and such cropping and shrinking methods do not reduce the amount of information of the image, and cannot shorten the time of publication. In the typesetting software, enlarging the image affects the image quality. . Therefore, it is best to complete the rotation, cutting and scaling of the image in the scanning and image processing software. In addition, we must pay attention to the individual typesetting software typesetting process (especially Chinese and English mixing), you can not use the Qi line and the forced line, because the function of these typesetting software is not all forced to produce when the page is displayed on the screen has been in line, However, the actual output is another matter.
4. In the image storage. There are currently many formats with their own characteristics. According to the specific situation to choose the storage format to avoid errors. Such as the commonly used TIFF image storage format, due to the large amount of stored information. However, some RIPs will make mistakes when dealing with larger TIFF maps of the imposition software. Therefore, it is better to store the images with a large amount of information in the EPS format and then put them into the production queue. In addition. Some RIPs will have a noticeable jump when processing a 0-100% transition from the Pagemaker 6.5 software. This can be solved by adding noise to the gradient image in Photosho p. (Author: Lin water)
We like to take care of all our customers outdoor entertaining needs and that's why a few years ago we expanded into heating and fire pits. Create a year-round outdoor entertaining experience with a range of quality outdoor heaters. When it comes to hosting family and friends through the chilly winter months, we`ve got you covered. We have a range of fire pits and radiant heating options to cover all your customers` Heating and Fire pit needs. The categories of Outdoor Heating products are Patio Heaters, Fireplaces, Log holders, Portable Gas Firepits and Heating Accessories to keep your outdoor entertaining area warm and toasty, even in the middle of winter.
Outdoor Heating,Patio Heater,Outdoor Heater,Outside Heaters
Dongguan Jiangxin Metal Products Co., Ltd , https://www.jiangxinbbq.com