Wood product deformation and cracking are common problems in home decoration. The climate in Beijing is very distinctive, and wood products such as doors, door covers, window covers and heating covers are subject to deformation and cracking. Under normal circumstances, the thickness of the door is 4.2 cm, the height is 190 cm, and the deformation within 5 mm is allowed by national standards.
The deformation and cracking of wood products is the reason of the material. If the moisture content of the wood is too high, the deformation is easy. Generally, the moisture content of the wood is less than or equal to 11.8%, and the moisture content is less than 6%. Very low. The higher the moisture content, the greater the possibility of deformation and the higher the value of the deformation.
Wood products deformation cracking and construction reasons, uneven paint coating, uneven use of adhesives may cause deformation of wood products, take the door as an example, if the amount of glue on both sides is inconsistent, or paint over the number of times The same, it will cause deformation.
The way to make up is to give the cracks a stucco and then paint.
The deformation and cracking of wood products is the reason of the material. If the moisture content of the wood is too high, the deformation is easy. Generally, the moisture content of the wood is less than or equal to 11.8%, and the moisture content is less than 6%. Very low. The higher the moisture content, the greater the possibility of deformation and the higher the value of the deformation.
Wood products deformation cracking and construction reasons, uneven paint coating, uneven use of adhesives may cause deformation of wood products, take the door as an example, if the amount of glue on both sides is inconsistent, or paint over the number of times The same, it will cause deformation.
The way to make up is to give the cracks a stucco and then paint.
This plastic Sensor Trash Bin could open easily at waving hands or kicking. It is made by eco-friendly plastic material--PP or ABS. Its surface is easy to clean and anti-fingerprinting.What's more, it supports two power sources--one is 2pcs AA Battery and the other is a re-chargeable lithium battery. You could choose one kind of way to apply in trash bin. It will bring more convenient experience of throwing trash for you to make you trash much more effectively and effortless.
Automatic Sensor Dustbin,Small Sensor Trash Can,Plastic Sensor Trash Bin,Infrared Sensor Trash Can
ZHEJIANG ERHUI TECHNOLOGY CO.,LTD , https://www.jahhome.com