Furniture is a major component of our home life and occupies a very important position in our lives. Therefore, due to the market demand, the furniture industry is very hot now, and the wood for furniture is very easy to break. How to properly preserve the wood for furniture? What is the specific method? Let us take a look at it!
How to properly preserve wood for furniture
Wood is a material that is susceptible to fungi, insects, fires and floods, so it is important to properly store the wood. In general, the storage methods required for stocked wood vary depending on factors such as tree species, use, climatic conditions, and retention period. There are three main types:
â–¶ Dry method
It is a storage method that reduces the moisture content of wood to less than 20% in a short period of time. It is one of the main storage methods for softwood. When dry logs are easily stored, it is necessary to apply a moisturizing paint to the end faces. When logs are stored in dry storage, they need to be peeled and then immediately piled into dry mash. Firstly, two layers of logs are laid on the ground as lame legs, and then the logs are placed layer by layer. There is a certain gap between the logs to facilitate air circulation, and each layer of logs is separated by a mat.
â–¶ Wet storage method
It is a method to maintain the high moisture content of the stored wood to avoid the occurrence of defects such as bacterial damage, green skin, insects and cracks. Keeping logs in wet storage requires stacking large, dense piles and watering them regularly. However, wet logs should not be used for logs that have been air-dried or have been infected with pests and pests, and for logs that are susceptible to cracking.
â–¶ Water storage method
Also known as the immersion preservation method, it is a method of burying logs in water to maintain a high water content in the wood to prevent the occurrence of fungi, insects and cracks in the logs. In the water storage method, the logs can be stacked directly in the pool or the wood can be selected to be suspended in the water. The materials that are floating on the surface of the water should be regularly watered, but the degree of wet mold and the easily cracked wood should not be water.
How to waterproof wooden furniture
Plate selection is the key
The cabinet board occupies a large part of the bathroom furniture. If you want to choose good bathroom furniture, the main materials can not be sloppy.
Tips: Choose the box board not only to be waterproof and moisture-proof, but also to meet the national standards of environmentally friendly materials is the key to protecting family health.
Back protection is important
In the process of selecting bathroom furniture, consumers must pay attention to the details of the back. The double decorative veneer back plate can completely prevent the MDF substrate from being exposed, and the water no longer has the opportunity to enter the plate from the back of the cabinet, which is a good helper for waterproof and moisture proof.
Tips: In real life, it is impossible to completely remove the ubiquitous water drops and water vapor after bathing every time. The back panel veneer is not only waterproof, but also a protector of extending the life of the furniture.
Minor observation
The selection of bathroom furniture must pay attention to the humanized design of the small part, which is the key factor in the success of the purchase of furniture.
Reminder: When you choose, you must not let go of the small part. Whether the furniture is professional or not can be seen through the observation of the details.
When selecting furniture, when checking the quality, pay attention to the following points:
1 Pay attention to the moisture content of wood
The water content is high and the wood is easily warped and deformed. The moisture content of the furniture should not exceed 12%. When the general consumer buys, there is no test instrument. You can take the method of hand touch and touch the bottom of the furniture or the place where there is no paint inside. If it feels moist, then the moisture content is at least More than 50% can't be used at all. Another way is to sprinkle a little water on the unpainted wood. If the sputum is slow or not, the moisture content is high. The selected wood-based panels have deformation, edge expansion, and intermediate unevenness, indicating that the water absorption rate of the board is too high.
2 pay attention to the materials used in furniture
The surface materials of furniture, such as the legs of tables, chairs and cabinets, require hardwood, oak, ash, eucalyptus, etc., which are relatively strong and can bear the weight, while other materials can be used for internal materials. The thickness of the large wardrobe legs is required to be 2.5 cm. When it is too thick, it is awkward and thin and easy to bend and deform. Kitchen and bathroom cabinets cannot be made of fiberboard, but should be made of plywood.
Because the fiberboard has strong water absorption, it will expand and damage when exposed to water. The table in the restaurant should be washable. It was found that the wood had insect eyes and foaming, indicating that the drying was thorough. Such furniture could not be bought, and the insects would bite more and more. After checking the surface, open the door and the drawer door to see if there is any decay in the inner material. You can lick it with your fingernails. If you break in, it means that the inner material is decaying. After opening the door, smell it with your nose. If it is nose, glare, or tears, it means that the formaldehyde content in the glue is too high and it will be harmful to the human body.
Document.body.oncopy = function () { setTimeout( function () { var text = clipboardData.getData("text"); if (text) { text = text + " This article comes from China Wooden Door Network, China's well-known wooden door industry portal Website! (http://) Detailed reference: "+location.href; clipboardData.setData("text", text); } }, 100) }Adjustable Height Conference Table
Chex aims to create intelligent office space. Lift the desk while giving consideration to comfort and efficiency. We take Sit Stand Desk as the carrier, and advocate the new concept of "alternate standing and sitting, work more healthily". Our goal is to create a healthy, intelligent, efficient and personalized overall office plan for sedentary office workers around the world. We have a professional customization team on Adjustable Standing Desk, which can meet the needs of customers and provide you with unique products.
Height Adjustable Desk,Adjustable Height Conference Table,Adjustable Desktop Standing Desk,Height Adjustable Wooden Standing Desk
Suzhou CHEX Intelligent Technology Co., Ltd. , https://www.sjqxhdesk.com