The constant temperature and humidity test chamber is a high-end precision instrument. In order to prevent the appearance of scratches during handling and unloading, and the fragility caused by excessive tilt angle during handling, the following small series introduces you to the following points:
1. When transporting the constant temperature and humidity test chamber, it must not be tilted. Since the test box is cooled by the compressor, it must not be tilted during the handling. If there is a special situation, the tilt angle should not exceed 15 degrees. Avoid Freon leaks that can't be cooled.
2. When pulling the constant temperature and humidity test chamber with the tower crane, in order to prevent accidents, it should be carried out slowly at a constant speed.
3. Before the shovel is used to lift the test box by the forklift, in order to prevent the forklift from scratching the bottom of the equipment, the pallet should be placed under the constant temperature and humidity test chamber in advance.
4. The forklift should drive at a constant speed. Make sure that the width and height of the door are greater than the width and height of the test box before entering the door to prevent it from getting stuck when entering the door.
5. When the equipment is placed on the ground, the speed should not be too fast. If it is too fast, it may cause the internal parts of the test box to loosen.
Bamboo Water Bottle,Water Bottle,Vacuum Water Bottle,Bamboo Drinking Water Bottle
NINGBO GECEN PROMOTION & GIFT CO.,LTD. , https://www.nbgecen.com