Customized wardrobe installation, what should you pay attention to during the on-site installation of custom wardrobes?
Customized wardrobe installation seems to be a complicated process. Only after you understand the specific installation steps and methods, you will feel that the custom wardrobe installation is not as difficult as you think. Customized wardrobes need to be tailored to achieve twice the result with half the effort. Let's take a look at the custom wardrobe on-site installation process to pay attention to what?
First, preparation stage
1, the material is on the scene; more formal furniture factory, the board is generally shipped with cardboard packaging. After unpacking, check the plates and hardware (custom furniture case).
2, fixing screws; the nails are generally left in the design according to the design drawings, and the workers at the site use special tools to fix the screws.
3. The side panel is cut; since the wardrobe is placed on the wall, the side panel should be sawn off at the position of the baseboard. After you have finished it, look at it and see if it fits.
How to match the wardrobe color, floor decoration and wardrobe color
How to match the color of the wardrobe, the floor decoration and the color of the wardrobe. When you are decorating the bedroom, have you paid attention to the matching of the color of your floor and wardrobe? As the color of the wardrobe continues to increase, we must consider whether the color of the floor and the wardrobe are coordinated. Consumers must consider whether the color of the floor and wardrobe are coordinated when decorating the bedroom. Generally we can adjust according to the decoration style.
Second, the installation phase
1. Place the bottom plate; the floor placed on the bottom of the wardrobe should be cleaned beforehand, because it will be very troublesome to clean up after installation.
2. Fix the frame; install the side and back panels of the wardrobe according to the grooves on the plate, and adjust the position between the plates.
3, install the top plate; the site is best to prepare a climbing stool, the top plate should be lifted up and then fixed with rivets.
4. Install the shelf; place the shelf in the place where the screws are pre-punched, and then fix it. Pay attention to the fixed position of the shelf and the back and side panels.
5, fixed door rail; installed on the top and bottom of the wardrobe door rail, the door rail selection alloy material is better, light and firm.
6. Install the clothes rail; fix the rivet in the reserved position and install the clothes rail. Note that the two sides should be balanced.
Third, the closing stage
1. Install the door leaf; the two sliding doors should be attached to the position of the guide rail. Fix the door leaf first and then fix the guide rail of the bottom side to avoid the phenomenon that the door leaf falls off in the future.
2, adjustment and improvement; after the installation, the wardrobe will be a "full inspection", if there is a deviation, timely adjustment.
Fourth, the completion of acceptance
Check the wardrobe: Shake the cabinet to see if it is firm and the details are in place.
The identification of solid wood wardrobes and panel wardrobes, solid wood wardrobes and panel wardrobes, teach you how to identify solid wood wardrobes and panel wardrobes
The identification of solid wood wardrobes and panel wardrobes, solid wood wardrobes and panel wardrobes teaches you how to identify solid wood wardrobes and panel wardrobes. The main reason for buying wardrobes is the choice of styles and raw materials. Solid wood wardrobes give people a natural elegance, such as the recent popular retro. The trend, it looks very noble but the style of the general family is not coordinated with it, not so much can not match the elegance of the solid wood wardrobe, it is better to say that the solid wood wardrobe is not fashionable and fashionable!
Horse Bits ,Western Bits And Bit Guards ,Bit And Bridle,Universal Bit
NINGBO BRIGHT MAX CO., LTD. , https://www.smartrider-equinebrush.com