[ Chinese wardrobe net ] The combination wardrobe , in simple terms, is a wardrobe that is combined with different parts. This wardrobe is easy to assemble and disassemble, and it can store a lot of items. So now the combination wardrobe is loved by most people. One of the biggest advantages of the combination wardrobe is that it is moisture-proof. This is also the main reason people trust it. Since it is a combination wardrobe, it is said that when we purchase it, we need to install it. So how should the combination wardrobe be installed?
Combination wardrobe installation guide
The installation of the combination wardrobe is generally not too complicated. In order to let the customer know clearly how to install it, the manufacturer has minimized the installation steps, and each interface is also prepared in advance. The user only needs to follow the installation diagram step by step. Yes, pay special attention to the installation sequence and correctly install the components to the appropriate locations.
1. When installing the combination wardrobe, first make sure the bottom plate is secure. It is very important to lay a good foundation. If the bottom is not secure, the structure of the entire wardrobe will be unstable. When installing, pay attention to the interface to be aligned, the installation is stable, the hand shake will not cause shaking, the bottom generally has drawers, you can not install first, first determine the frame, reserve the installation space.
2. After the bottom of the combination wardrobe is installed, then install the back panel. Pay attention to keep the back panel and the bottom plate at a right angle of 90 degrees. Do not tilt. It is best to measure it carefully with a measuring tool to avoid errors. After installing the backboard, install the side panel and the top panel of the combination wardrobe. One side of the side panel is connected to the back panel, and one side is connected to the bottom panel. The board and the board are at a right angle of 90 degrees. The top panel is installed on the top of the wardrobe. Pay attention to the interface. Stable, secure it to the top.
3. Now, the general frame of the combination wardrobe has been established, and finally the remaining parts such as cabinet doors, laminates, clothes rails, clothes trays, drawers, etc. are installed. These combination wardrobe installation drawings are specifically marked, as long as the merchants reserve The wardrobe space will be installed one by one.
4. Since the birth of the combination wardrobe, it has been deeply loved by consumers because of its powerful storage function. In recent years, with the improvement of people's living standards and the development of social diversification, the design of home and furniture industry has gradually evolved. Step into a diversified, utilitarian model. Although the combination wardrobe is not a product of recent years, due to the development trend of the modern furniture industry, the combination wardrobe has also changed to some extent.
Although the combination wardrobe needs us to install step by step, in general, the installation of the combination wardrobe is not very complicated. When we bought the wardrobe, there will be a description of the installation, we only need to follow the instructions step by step to install it. It is important to note that the installation of the combination wardrobe is sequential. We have to figure out the order and install it again. Before we install, the first thing we should do is to put the floor. This article describes the installation strategy in detail, you can use as a reference.
Genuine Leather Briefcase,Sport Mountaineering Bag,Mountaineering Hiking Bag
Longzhao Technology (Guangdong) Company limited , https://www.princebag.com