Baby carriages are an important toy for children as they grow up.
The innocence of the children's car is a small tricycle. The children ride it inside and outside the house. Nowadays, there are more and more types of baby carriages, including baby walkers, strollers, children's tricycles, and children's bicycles. The function of the stroller has long been more than just a kind of children's toy, but also includes various functions such as learning to walk, adapting to the environment, keeping fit, playing games, and so on. Therefore, the quality of strollers has a direct impact on children's physical and mental health and use safety, and has been increasingly concerned by parents.
In order to protect children's health and safety, promote the quality of child carriages, and standardize the development of the baby carriage industry, the AQSIQ recently conducted national supervision and spot checks on the quality of stroller products and announced results of spot checks. A total of 50 products produced by 40 companies in Anhui, Zhejiang, Jiangsu, and Guangdong, which are relatively concentrated in Anhui Province, Zhejiang Province, Jiangsu Province, and Guangdong Province, were selected. 37 products were qualified, and the average sampling qualification rate was 74%.
The results of spot check showed that due to the simple production process of the stroller and the relatively low investment in production, the domestic baby carriage manufacturing enterprises mainly focus on small and medium-sized enterprises. The gap between quality management level and quality control level of the enterprise is large, and product quality is also uneven. In this regard, the AQSIQ analyzed in this random inspection announcement that although the quality of stroller has been improved compared to the past, spot checks still found some quality problems, mainly in:
There are two types of product protrusions on children's bicycles. For example, after the bolts are tightened, the exposed protrusions are long and there are no protective sleeves. It is easy to scratch the user during use and handling. In particular, self-protection awareness is not very high. Children. The second is that the vertical load test and balance wheel size each have a product that is unqualified. This product will cause the child to fall when riding a bicycle because the balance wheel does not support and balance. The third is that the brake system of the brake does not meet the requirements of the standard. There is no protective sleeve at the end of some of the brakes and it is easy to scratch children. Fourth, the vertical distance between the horizontal pipe and the saddle surface is too large, causing children to ride inconveniently.
The width of voids in the spokes of children's tricycles, which are two types of products, does not conform to national standards. The standards require that the width of the spokes in the spokes should not be between 5mm and 12mm so as not to pinch children's fingers. The second is that there is no insertion depth mark for the riser of one kind of product. This will result in insufficient safety due to lack of depth of insertion and a safety accident. Thirdly, there are two kinds of products that do not have instructions for use, which can cause difficulties for the user in the installation, use, and maintenance of the product, and may even cause unexpected injury to children.
If the child stroller has one type of product, the strength of the whole vehicle is unqualified because the strength of the used material is not enough. Second, there is one type of product, and the strength of seat belts and their devices is not enough to protect children's safety. Thirdly, there is a failure of the strength of the brake system of one kind of product. In the course of use, there may be unexpected injuries due to the failure of the brake.
The infant walker has three kinds of products whose structure is unqualified. The unlocking force of some product locking devices does not meet the standard requirements. Infants may cause pinching due to misoperation of the locking device. The second problem is that the product packaging plastic film is unqualified. When a child comes into contact with a film with insufficient thickness, it may be chewed and teared during play, resulting in accidents such as suffocation and entanglement. Therefore, when the thickness of the plastic film does not meet the standards, there must be a warning sign to remind adults to pay attention, otherwise it may cause accidental injury to children because of adult neglect.
For the results of this national supervision and spot check, the AQSIQ has instructed all relevant quality and technical supervision departments to strictly implement the rectification and re-examination measures in accordance with the relevant laws and regulations. ; For this time a random inspection of product quality of the production enterprises, to increase publicity efforts to guide consumption. At the same time, it actively organizes unqualified enterprises to earnestly study the national standards related to baby carriages, raise awareness of product quality, improve the quality management level and quality control level of enterprises, and promote the continuous improvement of the quality level of China's baby carriage industry.
(Buy baby stroller, baby carriage wholesale, sales, find China Baby Carriage Industrial Network /)
Tub Drain,Tub Drain Kit,Bath Tub Drain,Tub Drain Assembly
Anping Sunshine Sanitary Ware Co., Ltd. , https://www.sunshinebathtubs.com