About the introduction of HP LaserJet P1007 printer toner cartridge

I think the HP LaserJet P1007 printer is an upgraded version of the 1020, but the biggest drawback of the 1007 is that the powder bin is too small. After printing for a while, it has a lot of powder, and then the printed paper is black on the right. Let me introduce you to the relevant introduction of the toner cartridge.

The common sense of the use of HP LaserJet P1007 printer toner cartridge:

When installing and removing the toner cartridge, first power off the printer. Before loading the new toner cartridge into the printer, gently shake it a few times to make the toner loose and even to ensure the printing effect. Avoid direct contact with the drum core and do not touch the drum core with your hands. When the toner is about to run out and the print marks are no longer clear and even, remove the toner cartridge and shake it a few times to continue printing dozens of pages. In order to avoid affecting normal office work, users should keep a new toner cartridge ready for use. The used empty selenium should be properly packaged and stored to avoid polluting the environment.

Several phenomena and solutions often appear in the HP LaserJet P1007 printer toner cartridge

Leakage of the toner cartridge: In addition to damage to the casing, it is usually caused by the magnetic powder in the toner cartridge during transportation or during the use of some customers. The solution is simple, just turn the drum core a few turns in the direction. The print document and the drum core have a vertical black hole of the same width of 1 cm or more at the same time: this is a problem with the scraper, causing the powder on the stick core to be unclean.

Vertically thin black lines appear on the printed document: usually the scraper and the small scraper on the side of the scraper are stuck with dirt or shredded paper. A horizontal blackout appears in the printed file: usually the magnetic stick in the toner cartridge is powdered and can be rotated a few times. If there is a noticeable bottom ash on the printed document: it is usually a problem with the drum core or toner.

The color of the printed document is uneven, and there is a famous white road: from the outside, the magnetic stick can not see the toner. If there is some powder on the magnetic stick, there is no powder in some places, indicating that the toner cartridge is used up. If the printer prints a blank sheet of paper: first check if there is any problem with the printer. If there is no problem, it means that the toner cartridge is having problems during assembly. Take the toner cartridge out of the print and remove the screw on the right side according to the method below.

The above is about the introduction of the HP LaserJet P1007 printer toner cartridge, to correctly use the toner cartridge, to understand several common error phenomena and solutions, so as to avoid the problem when the time is delayed and the work is interrupted.

Living Room Furniture

Height Adjustable Dining Table Frame

Home Coffee table, Living room furniture set with marble top. Add some simple and contemporary elegance to your home.

It's easy to storage and keep tidy, when you finish your meal, you can adjust your desk to a higher position, you can use it as a Computer Desk , Height Adjustable Workstation. This will help you make the most of the table.
Featuring smooth surface, this dining table is easy to be kept clean, new material processed through multiple processes--Rock Slab, which are high temperature resistant, scratch resistant, corrosion resistant and corrosion resistant.

The desk frame's height and length both can be adjusted. Flexible design to fit all small living spaces, such as your kitchen, dining room or home office.


Home Dining Tables Customized SINTERED STONE Top Furniture Electric Height Adjustable Desk Restaurant Dining Table

Multifunction: height adjustable steel frame

It's a dining table & height adjustable workstation & Home Office Computer Table.


Foshan Hollin Furniture Co.,Ltd is the leading supplier of metal and wood furniture. We are located in Foshan City China, well known as " the Hometown of Furniture".Our mission is to Improve Working& Study Environment and Enjoy Comfortable Life, we are specialized in Ergonomic Height Adjustable Desk: Electric Standing Desk , Desk Converter , gas lift and manual Height adjustable Laptop Desk, Overbed Table , sofa table, adjustable and movable lectern...We export our products to USA, Europe, Asia, Middle East etc.We have good cooperation with Office Depot., Office Warehouse, Homepro....


Dining table, Coffee table, Living room furniture set, Marble dining desk, Electronic standing desk

Foshan Hollin Furniture Co.,Ltd , https://www.china-hollin.com